Hioki BT-3554 - Battery Tester for Lead Acid Batteries

Hioki BT-3554 - Battery Tester for Lead Acid Batteries


Hioki portable battery tester BT3554 support the maintenance of UPS and storage batteries critical to the life support of all businesses. Hioki BT3554 battery internal resistance tester sets the standard for assessing the deterioration and remaining life of UPS and other lead-acid batteries by giving a complete diagnosis via battery resistance testing. The specially designed L2020 Pin Type Lead further improves testing efficiency with an L-shaped tip that lets you reach deep into the battery racks to completely probe the terminals.

 Key Features • Measure and save data in as fast as 2 seconds, a 60% improvement from the legacy 3554 • Instantaneously diagnose battery degradation (PASS, WARNING, FAIL) by measuring internal resistance and voltage • Noise reduction technology improves noise resistance • Analyze battery health in real time using Bluetooth® wireless technology • New protector delivers better ergonomic hold and durability in the field.

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Resistance measurement range3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges
Accuracy: ±0.8 % rdg. ±6 dgt. (3 mΩ range: ±1.0 % rdg. ±8 dgt.)
Testing source frequency: 1 kHz ±30 Hz, With function for avoiding noise
frequency enabled: 1 kHz ±80 Hz, Testing current: 160 mA (3m/30 mΩ range), 16 mA (300 mΩ range), 1.6 mA (3 Ω range), Open terminal Voltage: 5 V peak
Voltage measurement range± 6 V (max. display ±6.000 V, resolution: 1 mV) to ± 60 V (max. display ±60.00 V, resolution: 10 mV), 2 ranges, Accuracy: ±0.08 % rdg. ±6 dgt.
Absolute max. input voltage60 V DC max. (No AC input)
Display update rateApprox. 3 times/s
Comparator functionsResistance warning limit / failure limit, and voltage warning limit setting; Number of comparator setting: 200 sets, Beeper sound, PASS/WARNING or FAIL
Data storageMax. storable data: 6000 sets. (Saved items: Date, time, resistance value, voltage value, temperature, comparator setting values, and comparator judgement.)
Communication interfaceVia USB (forward the data to the PC, bundled software)
Built-in Bluetooth® 4.0 LE, supports tablets and smart phones with iOS 10 or Android™4.3 or later
GENNECT Cross (Freeware): Display list of measured values, generate reports, or display the trend (on the PC only)
Other functionsTemperature measurement (-10.0 to 60.0 °C), Zero-adjustment, Hold, Auto-hold, Auto-memory, Auto-power-save, Clock
Power supplyLR6 (AA) Alkaline dry battery ×8, Continuous operating time: 8.5 hr
Dimensions and mass199 mm (7.83 in)W × 132 mm (5.20 in)H × 60.6 mm (2.39 in)D (with protector), 947 g (33.4 oz) (including batteries and protector)
AccessoriesZero adjustment board ×1, Instruction manual ×1, Application software CD ×1, Power-on option sticker ×1, Carrying case ×1, LR6 (AA) alkaline batteries ×8, Spare fuse ×1, USB cable ×1, Neck strap ×1, Protector ×1
Intentionally left blank

Options

Measurement Leads A

Primarily for use with lead acid batteries, easy 4-terminal measurement, 2.7 mm dia. single-axis type
PIN TYPE LEAD L2020
A: 70 mm (2.76 in) (Red), 150 mm (5.91 in) (Black, up to 630 mm (24.8 in)), B: 164 mm (6.46 in), L: 1941 mm (76.42 in) (Red)

PIN TYPE LEAD 9465-10
A: 45 mm (1.77 in) red, 105 mm (4.13 in) black 515 mm (20.28 in) Max., B: 176 mm (6.93 in), L: 1883 mm (6.18 ft)

TIP PIN 9465-90
To replace the tip on the 9465-10, L2020, (one piece)

Measurement Leads B

Primarily for use with lead acid batteries, large angle of probe application, 2.5 mm pitch 2-axis pin type
PIN TYPE LEAD 9772
A: 45 mm (1.77 in) red, 105 mm (4.13 in) black 515 mm (20.28 in) Max., B: 173 mm (6.81 in), L: 1880 mm (6.17 ft)

TIP PIN 9772-90
To replace the tip on the Pin type lead 9772, L2100/L2110, (one piece)

Measurement Leads C

LARGE CLIP TYPE LEAD 9467
A: 300 mm (11.81 in), B: 131 mm (5.16 in), L: 1310 mm (4.30 ft), tip φ 29 mm (1.14 in), 50 V DC

CLIP TYPE LEAD WITH TEMPERATURE SENSOR 9460
For the 3554, 3540, A:300 mm (11.81 in), B:106 mm (4.17 in), L:2268 mm (7.44 ft)

REMOTE CONTROL SWITCH 9466
Can hold the values while measuring them, for the BT3554 (use with the L2020), 9772, 9465-10

Option

Use commercially available hook-and-loop fasteners when securing to the carrying case.
0 ADJ BOARD Z5038
For L2110, L2020, 9465-10, 9772
You may send your inquiries to info@indiameters.in or call directly at 033-22350923 / 8961089611.

If you are based in Kolkata, you can directly buy from store. The address is:
Industrial Supply Syndicate, 54, Ezra Street, Kolkata - 700001

 Keywords: Buy Hioki BT3554 online, Hioki BT3554, BT3554, Hioki 3554 Hioki Battery Tester


Comments

Post a Comment

Popular posts from this blog

ELCB Tester for periodic testing of ELCB / RCCB / RCBO

Image
 Digital ELCB / RCCB Tester - Kusam Meco KM-1812EL  Periodic testing of ELCBs and RCCBs is a must. ELCB Testing is done  by using the Current Injection Method, wherein simulating an appropriate fault condition, a low magnitude fault current is injected to test whether the device trips or not . A functioning ELCB / RCCB will trip the circuit during a Current Injection Test.  Special Features • 2 Lines x 16 Characters L.C.D • Low power consumption • Microprocessor Controlled • Menu Driven • Accurate Digital Readout of Disconnection Time. • Automatic Data Hold function. • Zero Crossing Circuitry permit testing at 0° or 180° • Disconnection Phase Polarity shown on L.C..D.Display • Auto Power off. • Polarity Trip Indicater • Wiring Polarity Indicator • Measures Voltage & Frequency between Line & Earth before testing. • Safety: EN 61010 - 1 CATIII 240V. General Specifications • Current Setting :  3mA, 5mA, 7mA, 10mA, 15mA, 20mA, 30mA, 35mA, 50mA, 100mA,125mA,150mA,175mA, 250mA, 300mA
Read more

Schneider EM6400NG - Multifunction Energy Meter

Image
Schneider EM6400NG The EM6400NG series meters are digital meters that offer comprehensive 3-phase electrical instrumentation and load management facilities in a compact and rugged package. The EM6400NG meters offer value for the demanding needs of your energy monitoring and cost management applications. All meters in the EM6400NG series range comply with Class 1, Class 0.5S, or Class 0.2 accuracy standards and feature high quality, reliability and affordability in a compact and easy to install format. EM6400NG is Multifunction Energy meter with NextGen features like Harmonics  & Min/Max Monitoring, Digital security • Energy Standard – Class 0.2/0.5S/1 as per IEC 62053-22 / 21 • Power quality analysis with THD & individual harmonics upto  15th over communication • 13 different wiring configuration scheme • Volts, Amps, PF, THD, F, W, Wh, VA, VAh, Var, Varh, Runhrs, Onhrs,  Interupts, Preloaded Demand & Import /Export • Min/Max Monitoring with Date/Time stamping • Calibration
Read more

Hioki PQ3100 Power Quality Analyser

Image
POWER QUALITY ANALYZER PQ3100 3-Phase 4-Wire Power Quality Analyzer Compliant to IEC61000-4-30 Class S Standards and On-screen Guide to Deliver Easy Setup and Testing Hioki portable power analyzer   PQ3100 is best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The PQ3100 is a comprehensive but easy-to-use power quality analyzer for monitoring and recording power supply anomalies, allowing their causes to be quickly investigated, and also for assessing power supply problems such as voltage drops, flicker, harmonics, and other electrical issues. Key Features • Record data including voltage, current, power, harmonics, and flicker simultaneously along a single time axis • Measure up to 6000 A AC • Capture all power anomalies, including instantaneous outages, voltage drops, and frequency fluctuations, while simultaneously recording trend data • Quick Set: Easy-to-understand on-screen guide for mea
Read more